Chrysler 2011 200 - User Guide Manuel d'utilisateur télécharger pdf (Page 40)

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) – If Equipped

• The EVIC can be used to program the following Personal Settings. Press and release the

MENU button until Personal Settings displays, then press the DOWN button

to scroll

through the settings. Press the SELECT button

to change the setting.

• Language • Delay Power Off to Accessories until Exit

• Lock Door Automatically at 15 mph

(24 km/h)

• Turn Headlamps On With Remote Key

Unlock

• Auto Unlock On Exit • Confirmation of Voice Commands

• Remote Unlock Driver's Door 1st • Illuminated Approach

• Sound Horn With Remote Key Lock • Display ECO

• Flash Lights With Remote Key Lock • Display Units In

• Delay Turning Headlights Off

Key Fob Programmable Features

• The following features may also be programmed by using the Key Fob transmitter or the

ignition switch and driver's door lock switch.

NOTE: Pressing the LOCK button while you are inside the vehicle will activate the Vehicle

Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to

sound. Press the UNLOCK button to deactivate the Vehicle Security Alarm.

Unlock On First Press

• To unlock either the driver's side, or all doors, on the first press of the UNLOCK button:

• Press and hold the LOCK button for at least 4 seconds, but no longer than 10 seconds.

Then, press and hold the UNLOCK button while still holding the LOCK button.

• Release both buttons at the same time.

Auto Unlock Doors On Exit

• To have all of the vehicle doors unlock when any door is opened:

• Enter your vehicle and close all the doors.

• Cycle the ignition switch between LOCK and ON and then back to LOCK four times,

ending up in the LOCK position (do not start the engine).

• Press the power door UNLOCK switch to unlock the doors. A single chime will indicate that

programming is complete.

Auto Door Lock

• To have the doors lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h):

• Enter your vehicle and close all the doors.

• Cycle the ignition switch between LOCK and ON and then back to LOCK four times,

ending up in the LOCK position (do not start the engine).

• Press the power door LOCK switch to lock the doors. A single chime will indicate that

programming is complete.

ELECTRONICS

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Chrysler 2011 200 - User Guide Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Chrysler 2011 200 - User Guide