Chrysler SRT8 2012 Manuel du propriétaire télécharger pdf (Page 531)

100

101

4. Install the wiper blade pivot pin into the wiper blade

holder at the end of the wiper arm, and firmly press the

wiper blade until it snaps into place.

5. Lower the wiper blade and snap the pivot cap into

place.

Adding Washer Fluid

On vehicles equipped with a Electronic Vehicle Informa-

tion Center (EVIC), the low washer fluid level will be

indicated. When the sensor detects a low fluid level, the

windshield will light on the vehicle graphic outline and

the “Washer Fluid Low” message will be displayed. Refer

to “Electronic Vehicle Information Center” in “Under-

standing Your Instrument Panel” for further information.

The fluid reservoir for the windshield washers and the

rear window washer is shared. The fluid reservoir is

located in the engine compartment, be sure to check the

fluid level at regular intervals. Fill the reservoir with

windshield washer solvent only (not radiator antifreeze).

When refilling the washer fluid reservoir, take some

washer fluid and apply it to a cloth or towel and wipe

clean the wiper blades, this will help blade performance.

1 — Wiper Blade

2 — Blade Pivot Pin

3 — Wiper Arm

4 — Wiper Blade Holder

MAINTAINING YOUR VEHICLE 529

1 2 ... 526 527 528 529 530 531 532 533 534 535 536 ... 610 611

Commentaires sur ces manuels

Pas de commentaire

Chrysler SRT8 2012 Manuel du propriétaire Page 531

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Chrysler SRT8 2012